Skip to contentDEMOThis site is a showcase demo built by Briefikir. Contact us for your company website
TR — TürkçeGet a quote
Kenetra Standing Seam Roof Panel

MB-KN-KPSeries: Kenetra

Kenetra Standing Seam Roof Panel

Standing-seam roof with concealed clips and no exposed screws; roll-formed in single lengths for long, low-pitch roofs.

Coverage
1,08 m²/m² (kenet payı dahil)
Packaging
Ordered per m², cut to length
Application
−20 °C / +60 °C
Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage1,08 m²/m² (kenet payı dahil)
Curing—
Application temperature−20 °C / +60 °C
PackagingOrdered per m², cut to length
ColourRAL colours, mill aluminium
Shelf life—
MaterialAlüminyum 0,7 mm / galvaniz 0,6 mm
Seam height65 mm
Min. pitch%3

About the product

Kenetra Seam panels are roll-formed in single lengths on site or in the factory and joined by machine seaming. Concealed clips mean no screw holes in the surface, minimising leak risk.

Clips allow thermal sliding, so even lengths over 100 m stay flat. Suitable for pitches down to 3%. Aluminium and pre-painted galvanised options.

Areas of use

  • Sports halls and exhibition centres
  • Schools and public buildings
  • Curved architectural roofs

Application steps

  1. Check purlin levels, spacings and roof pitch.
  2. Set the first panel square to the eaves and ridge lines.
  3. Join panels at the lap or seam line and fix them to purlins with sealed screws.
  4. Close ridges, valleys, chimneys and skylights with purpose-made flashings.
  5. Remove the protective film, clear swarf and recheck screw tightness.

Complementary products

Services using this product

RoofingStanding-seam roofingAluminium or galvanised standing-seam roofs with concealed clips and no screw holes; single lengths for long, low-pitch roofs.