Skip to contentDEMOThis site is a showcase demo built by Briefikir. Contact us for your company website
Kenetra Polycarbonate Rooflight

MB-KN-PKSeries: Kenetra

Kenetra Polycarbonate Rooflight

UV-protected polycarbonate rooflight matching sandwich panel profiles; brings daylight into factories and warehouses.

Coverage
1,05 m²/m²
Packaging
Ordered per m²
Application
−40 °C / +120 °C

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage1,05 m²/m²
Curing—
Application temperature−40 °C / +120 °C
PackagingOrdered per m²
ColourOpal, clear
Shelf life—
Light transmission%55 (opal)

About the product

Kenetra Rooflight matches the sandwich panel rib profile exactly and is UV-protected, reducing daytime artificial lighting.

Plan rooflights at 10–15% of the roof area; a fall-protection grille below is recommended.

Areas of use

  • Factory and warehouse roofs
  • Sports halls

Application steps

  1. Check purlin levels, spacings and roof pitch.
  2. Set the first panel square to the eaves and ridge lines.
  3. Join panels at the lap or seam line and fix them to purlins with sealed screws.
  4. Close ridges, valleys, chimneys and skylights with purpose-made flashings.
  5. Remove the protective film, clear swarf and recheck screw tightness.

Complementary products

MB-FX-PM

Fixor PU 25 Polyurethane Sealant

Construction chemicals · Sealants

Coverage
10 × 10 mm derzde ~6 m / 600 ml
Pack
600 ml sausage (≈6 m of 10 × 10 mm joint)

Services using this product