MB-CP-2KSeries: Çimpro

Çimpro 2K Flexible Waterproofing

Two-component, polymer-modified flexible cementitious waterproofing under tiles in wet areas, balconies and tanks.

Coverage: 2,5–3,5 kg/m² (iki kat, ~2 mm)
Packaging: 30 kg kit (22.5 kg powder + 7.5 kg liquid)
Application: +5 °C / +35 °C

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	2,5–3,5 kg/m² (iki kat, ~2 mm)
Curing	Recoat 4–6 h, tiling 24 h, water contact 7 days
Application temperature	+5 °C / +35 °C
Packaging	30 kg kit (22.5 kg powder + 7.5 kg liquid)
Colour	Grey
Shelf life	12 months dry
Crack bridging	≥ 0,75 mm
Bond strength	≥ 0,5 N/mm²

About the product

Çimpro 2K is a flexible waterproofing mortar mixed from a cement-based powder (A) and an acrylic polymer liquid (B). It bridges hairline cracks, bonds strongly to concrete and render and can be tiled directly.

It provides positive-side waterproofing in bathrooms, kitchens, balconies, under-terrace screeds and non-potable tanks. Do not exceed 2 mm per coat.

Areas of use

Bathroom and kitchen floors/walls
Balconies and terraces (under tiles)
Ornamental pools and fire tanks
Inside face of retaining walls

Application steps

Remove oil, release agents and dust; pre-wet the surface to a matt damp state.
Mix the components with a low-speed mixer for 3 minutes until lump-free.
Embed waterproofing tape into the first coat at wall–floor junctions.
Apply the first coat by brush or trowel; the second coat crosswise after 4–6 hours.
Protect from water and direct sun for 3 days; tiles may be fixed after 24 hours.