MB-FX-C2Series: Fixor

Fixor C2TE Flexible Tile Adhesive

High-performance, non-slip adhesive with extended open time for large-format tiles and porcelain.

Coverage: 4–6 kg/m² (tarak dişine göre)
Packaging: 25 kg bag
Application: +5 °C / +35 °C

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	4–6 kg/m² (tarak dişine göre)
Curing	Open time 30 min, grout after 24 h
Application temperature	+5 °C / +35 °C
Packaging	25 kg bag
Colour	Grey, white
Shelf life	12 months
Class	C2TE (EN 12004)
Tensile adhesion	≥ 1,0 N/mm²

About the product

Fixor C2TE’s high polymer content lets tiles be fixed securely over waterproofing membranes, old tiles and heated screeds. It does not slip on walls, and its long open time eases work on large areas.

For interior and exterior use, wet areas, balconies and terraces. Back-butter tiles over 60 × 60 cm.

Areas of use

Tiles over waterproofing
Large-format tiles and porcelain
Tile-on-tile

Application steps

The substrate must be sound, flat and dust-free; prime absorbent surfaces.
Add powder to clean water, mix, let stand 5 minutes and remix.
Spread with a notched trowel on the substrate and, where needed, back-butter the tile.
Press and slide tiles into place within the open time.
Wait at least 24 hours before grouting.