MB-CP-HVSeries: Çimpro

Çimpro Pool & Tank Waterproofing

Two-component flexible waterproofing resistant to chlorinated water and constant pressure; for pools, fire and irrigation tanks.

Coverage: 3,0–4,0 kg/m² (iki kat)
Packaging: 30 kg kit (A+B)
Application: +8 °C / +30 °C

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	3,0–4,0 kg/m² (iki kat)
Curing	Tiling 48 h, filling 14 days
Application temperature	+8 °C / +30 °C
Packaging	30 kg kit (A+B)
Colour	Light grey
Shelf life	12 months
Water pressure (positive)	5 bar

About the product

Çimpro Pool is a high-polymer cementitious system for pool and large tank surfaces under constant water pressure. It resists chlorinated and salt water.

Cold joints, outlets and nozzle penetrations are detailed first with tape and plugging mortar; two coats then prepare the shell for mosaic or tiles.

Areas of use

Swimming pools
Fire and irrigation tanks
Ornamental pools and cascades

Application steps

Remove oil, release agents and dust; pre-wet the surface to a matt damp state.
Mix the components with a low-speed mixer for 3 minutes until lump-free.
Embed waterproofing tape into the first coat at wall–floor junctions.
Apply the first coat by brush or trowel; the second coat crosswise after 4–6 hours.
Protect from water and direct sun for 3 days; tiles may be fixed after 24 hours.