MB-CP-KRSeries: Çimpro

Çimpro Crystalline Waterproofing

Capillary waterproofing that grows crystals in concrete pores; applied from the positive or negative side.

Coverage: 1,2–1,8 kg/m² (iki kat)
Packaging: 25 kg bag
Application: +5 °C / +30 °C

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	1,2–1,8 kg/m² (iki kat)
Curing	Keep damp for 3 days while curing
Application temperature	+5 °C / +30 °C
Packaging	25 kg bag
Colour	Grey
Shelf life	12 months
Water pressure resistance	7 bar (negatif yön)

About the product

Çimpro Crystalline is a cement-based material that reacts with free lime and moisture in concrete to form insoluble crystals in capillaries. The crystals become part of the concrete, so protection continues even if the surface is damaged.

Used from the inside (negative side) in basements that cannot be excavated, in lift pits, water tanks and treatment structures. Effective on concrete only; for brick and block walls use Çimpro Negative.

Areas of use

Inside of basement and retaining walls
Lift pits
Water tanks and treatment structures

Application steps

Remove oil, release agents and dust; pre-wet the surface to a matt damp state.
Mix the components with a low-speed mixer for 3 minutes until lump-free.
Embed waterproofing tape into the first coat at wall–floor junctions.
Apply the first coat by brush or trowel; the second coat crosswise after 4–6 hours.
Protect from water and direct sun for 3 days; tiles may be fixed after 24 hours.