MB-CP-NGSeries: Çimpro

Çimpro Negative-Side Waterproofing Mortar

Sulphate-resistant mortar applied from the inside against damp and seepage; also works on brick and block walls.

Coverage: 2,0–3,0 kg/m² (iki kat)
Packaging: 25 kg bag
Application: +5 °C / +30 °C

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	2,0–3,0 kg/m² (iki kat)
Curing	Recoat 6 h, render after 3 days
Application temperature	+5 °C / +30 °C
Packaging	25 kg bag
Colour	Grey
Shelf life	12 months

About the product

Çimpro Negative is a dense cementitious waterproofing mortar applied from inside basement and ground-floor walls whose outer face cannot be reached, stopping moisture from entering the room.

Remove damaged plaster down to a sound base and plug active leaks first. Finish with breathable render and paint; plastic emulsions are not recommended.

Areas of use

Damp basement walls
Base of ground-floor walls
Old stone and brick buildings

Application steps

Remove oil, release agents and dust; pre-wet the surface to a matt damp state.
Mix the components with a low-speed mixer for 3 minutes until lump-free.
Embed waterproofing tape into the first coat at wall–floor junctions.
Apply the first coat by brush or trowel; the second coat crosswise after 4–6 hours.
Protect from water and direct sun for 3 days; tiles may be fixed after 24 hours.