MB-TM-SV
Termaks ETICS Base Coat
Thermal insulation · ETICS components
- Coverage
- 3,5–4,5 kg/m² (iki kat)
- Pack
- 25 kg bag
MB-TM-DKSeries: Termaks
Termaks Decorative Finish Render
Silicone-resin, water-repellent, breathable textured finish that protects ETICS from weather.
- Coverage
- 2,2–2,8 kg/m² (1,5 mm tane)
- Packaging
- 25 kg bucket
- Application
- +8 °C / +30 °C
PDF documents are samples with a "DEMO" watermark.
Technical data
| Coverage | 2,2–2,8 kg/m² (1,5 mm tane) |
|---|---|
| Curing | Rain-resistant after 24 h |
| Application temperature | +8 °C / +30 °C |
| Packaging | 25 kg bucket |
| Colour | From the colour chart |
| Shelf life | 12 months |
About the product
Termaks Decorative is the coloured, textured finish of ETICS. Silicone resin repels rain while letting wall moisture escape.
Grain sizes of 1.5 and 2 mm give a scratched or float texture. Avoid very dark colours with light reflectance below 25.
Areas of use
- ETICS finish
- Rendered facade renewal
Application steps
- Clean the facade, remove loose render and fix a level starter track at the plinth line.
- Apply adhesive to the board by the perimeter-and-dab method for at least 40% contact.
- Lay boards bottom-up in a staggered bond without gaps, interlocking at corners.
- Anchor the boards once the adhesive has set (at least 24 hours).
- Embed mesh in the first base coat, then apply the second coat and the decorative finish.
Complementary products
MB-AS-GA
Astarix General-Purpose Acrylic Primer
Construction chemicals · Primers
- Coverage
- 0,10–0,20 kg/m²
- Pack
- 10 kg jerrycan
