MB-TM-SVSeries: Termaks

Termaks ETICS Base Coat

Fibre-reinforced polymer base coat that forms an impact- and crack-resistant layer with mesh.

Coverage: 3,5–4,5 kg/m² (iki kat)
Packaging: 25 kg bag
Application: +5 °C / +30 °C

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	3,5–4,5 kg/m² (iki kat)
Curing	Finish after 48 h
Application temperature	+5 °C / +30 °C
Packaging	25 kg bag
Colour	White
Shelf life	12 months

About the product

Termaks Base Coat is applied in two passes over insulation boards and reinforced with mesh. Fibres and elastic polymers prevent cracking under thermal movement.

Embed the mesh in the wet first coat; the second coat hides it and gives a flat surface. Total thickness 3–5 mm.

Areas of use

ETICS base coat
Corner and opening reinforcement

Application steps

Clean the facade, remove loose render and fix a level starter track at the plinth line.
Apply adhesive to the board by the perimeter-and-dab method for at least 40% contact.
Lay boards bottom-up in a staggered bond without gaps, interlocking at corners.
Anchor the boards once the adhesive has set (at least 24 hours).
Embed mesh in the first base coat, then apply the second coat and the decorative finish.