MB-TM-EG
Termaks Graphite EPS Board
Thermal insulation · Insulation boards
- Coverage
- 1,05 m²/m² (kesim payı dahil)
- Pack
- 6 m² pack (5 cm, 12 boards 100 × 50 cm)
MB-TM-YPSeries: Termaks
Termaks ETICS Adhesive
Polymer-modified cementitious mortar for bonding EPS, XPS and stone wool boards to facades.
- Coverage
- 4,0–5,0 kg/m²
- Packaging
- 25 kg bag
- Application
- +5 °C / +30 °C
PDF documents are samples with a "DEMO" watermark.
Technical data
| Coverage | 4,0–5,0 kg/m² |
|---|---|
| Curing | Anchor after 24 h |
| Application temperature | +5 °C / +30 °C |
| Packaging | 25 kg bag |
| Colour | Grey |
| Shelf life | 12 months |
| Bond to EPS | ≥ 0,08 N/mm² (EPS kopması) |
About the product
Termaks Adhesive is the first and most critical layer of ETICS. Its high bond strength keeps boards secure against wind suction.
Apply by the perimeter-and-dab method with at least 40% contact. Prime smooth concrete first.
Areas of use
- Bonding EPS/XPS/stone wool
- Soffit board fixing
Application steps
- Clean the facade, remove loose render and fix a level starter track at the plinth line.
- Apply adhesive to the board by the perimeter-and-dab method for at least 40% contact.
- Lay boards bottom-up in a staggered bond without gaps, interlocking at corners.
- Anchor the boards once the adhesive has set (at least 24 hours).
- Embed mesh in the first base coat, then apply the second coat and the decorative finish.
Complementary products
MB-TM-TY
Termaks Stone Wool Facade Board
Thermal insulation · Insulation boards
- Coverage
- 1,05 m²/m²
- Pack
- 2.88 m² pack (5 cm, 4 boards 120 × 60 cm)
MB-TM-DB
Termaks Steel-Pin ETICS Anchor
Thermal insulation · ETICS components
- Coverage
- 6–8 adet/m²
- Pack
- Box of 250
