MB-TM-EGSeries: Termaks

Termaks Graphite EPS Board

Grey graphite-enhanced EPS with λ 0.031 W/mK; reaches the same insulation value with thinner boards in ETICS.

Coverage: 1,05 m²/m² (kesim payı dahil)
Packaging: 6 m² pack (5 cm, 12 boards 100 × 50 cm)
Application: +5 °C / +30 °C (yapıştırma)

Data sheet (TDS)Safety sheet (SDS)Calculate quantity

PDF documents are samples with a "DEMO" watermark.

Technical data

Coverage	1,05 m²/m² (kesim payı dahil)
Curing	No drying required
Application temperature	+5 °C / +30 °C (yapıştırma)
Packaging	6 m² pack (5 cm, 12 boards 100 × 50 cm)
Colour	Grey
Shelf life	Unlimited if protected from UV
Thermal conductivity λ	0,031 W/mK
Density	16 kg/m³
Fire class	E (EN 13501-1)
Thicknesses	3–16 cm

About the product

Termaks Graphite EPS contains graphite particles that reflect radiant heat, giving about 20% better thermal performance than white EPS. The same U-value is achieved with thinner boards, simplifying window and sill details.

Used in ETICS. Shade the facade with scaffold netting during installation and avoid leaving boards exposed to sun for long periods.

Areas of use

Residential and office ETICS
Soffit insulation
Energy-efficiency retrofits

Application steps

Clean the facade, remove loose render and fix a level starter track at the plinth line.
Apply adhesive to the board by the perimeter-and-dab method for at least 40% contact.
Lay boards bottom-up in a staggered bond without gaps, interlocking at corners.
Anchor the boards once the adhesive has set (at least 24 hours).
Embed mesh in the first base coat, then apply the second coat and the decorative finish.