MB-BT-P4
Bitüra P4 Polyester Membrane
Waterproofing · Bitumen membrane
- Coverage
- 1,12 m²/m² (bindirme dahil, her kat için)
- Pack
- 10 m² roll (1 × 10 m)
MB-TM-XPSeries: Termaks
Termaks XPS Insulation Board
Closed-cell extruded polystyrene with very low water absorption; compression-resistant for inverted roofs, foundations and floors.
- Coverage
- 1,05 m²/m²
- Packaging
- 6 m² pack (5 cm, 8 boards 125 × 60 cm)
- Application
- −50 °C / +75 °C (kullanım)
PDF documents are samples with a "DEMO" watermark.
Technical data
| Coverage | 1,05 m²/m² |
|---|---|
| Curing | No drying required |
| Application temperature | −50 °C / +75 °C (kullanım) |
| Packaging | 6 m² pack (5 cm, 8 boards 125 × 60 cm) |
| Colour | Light blue |
| Shelf life | Unlimited if protected from UV |
| Thermal conductivity λ | 0,033 W/mK |
| Compressive strength | ≥ 300 kPa |
| Long-term water absorption | ≤ %0,7 (hacimce) |
About the product
Termaks XPS is a rigid extruded board whose closed cells absorb almost no water. This makes it essential in inverted roofs where it sits above the membrane and in earth-contact foundation insulation.
High compressive strength also suits car-park decks, trafficked slabs and cold-store floors. Available with shiplap or square edges.
Areas of use
- Inverted roofs
- Foundations and basement walls
- Ground slabs and car-park decks
- Plinth zones
Application steps
- Clean the membrane or substrate.
- Lay boards staggered with interlocking edges.
- On walls, bond with dabs of Likimem Bitumen Emulsion.
- On terraces cover with geotextile and a ballast/protection layer.
Complementary products
MB-LK-BE
Likimem Bitumen Emulsion
Waterproofing · Liquid membrane
- Coverage
- 0,8–1,2 kg/m² (iki kat)
- Pack
- 18 kg bucket
MB-TM-YP
Termaks ETICS Adhesive
Thermal insulation · ETICS components
- Coverage
- 4,0–5,0 kg/m²
- Pack
- 25 kg bag
Services using this product
